Care & Maintenance
Care & Cleaning Quick Guide Cards
Cleaning Internal Gutters
Your StruXure system has a 360 ̊ internal gutter system to get the water off the louvers when closed. These gutters may get filled with leaves and debris, particularly if near trees that shed or have falling leaves. Leaves and debris collect and clog the hole leading to the downspouts for your system. This will cause the gutters to back up and potentially have water spill over the gutters. It is the owner’s responsibility to make sure the gutters and downspouts are clean and clear of any debris that will cause the system to not perform properly.
Moderate Dirt
Your system will require occasional washing to remove any dirt or environmental buildup. We recommend using clean water with a garden hose and soft-bristled brush. You may use a quality auto detergent and/or auto brush to enable a gentile removal of dirt. Rinse thoroughly and wipe down dry.
Heavier Dirt Accumulation
Your system will require occasional washing to remove any dirt or environmental buildup. We recommend using clean water with a garden hose and a soft, non-abrasive cleaning detergent (pH 5-8).
Mildew Accumulation
Mildew can collect on surfaces of all types of building products. This can happen when the surface gets little or no sunlight to dry it off. Normally, mildew will appear as black spots and can be removed by using a soft, non-abrasive cleaning detergent (pH 5-8).
Environmental Black Streaking
Black streaking can also collect on the surface of a structure. Black streaking can be removed by using with a soft, non-abrasive cleaning detergent (pH 5-8).
Caulking Compounds, Tar, etc.
Use with a soft, non-abrasive cleaning detergent (pH 5-8).
Our Guide to care
A Pristine StruXure
for Life
Rinse & Repeat
Gently hose off dirt and debris as needed.
Open for Wind
Keep louvers open during strong wind conditions.
Keep It Clear
Avoid buildup by clearing gutters and drainage points.
Easy Upkeep
StruXure products are designed for minimal maintenance.
